https://xinyerunhua.en.made-in-china.com
Golden grease
Xinye
Crystal Lithium Base Grease
1.product overview
Golden lithium base grease is made of hydroxy base fatty acid thickened mineral oil by high temperature saponification. This product is proportionally added with a variety of additives, greatly improve its mechanical stability, colloidal stability, oxidation stability, rust and water resistance and other properties. Ensure that the grease remains soft and does not lose within the scope of use, and extend the oil change period.The product is a multipurpose grease. lt is formulated with special selected refined mineral base oilsand rust and oxidation inhibitors, and is thickened with a mixed compact and stable metal soapthickener. lt can provides excellent anti-wear protection, superior lubricity, as well as outstandingmechanical stability, water resistance, adhesion, sealing and rust resistance.
2.performance characteristic
Good adhesiveness.
Outstanding oxidation stability to ensure longer service life during application process.
Outstanding mechanical stability under harsh shearing forces.
Excellent resistance to water washout, improved lubricity even under conditions such as highambient humidity and inevitable contamination with water.
Excellent lubricity to reduce abrasion between friction pairs.
3.Recommended application
Suitable for the lubrication of low speed equipment such as construction machinery, agriculturamachinery.
Suitable for lubricating ceramics (such as polishing machines, transmission bearings), metallurgysuch as conveying roller table), automobile (chassis, wheel hub) and conventional generamachinery, etc.
Application temperature range: -20'C~120°C.
4.Typical data
Item | Typical data | Test method | ||
NLGI 1 | NLGI 2 | NLGI 3 | ||
Appearance | Smoothing cream | Visual | ||
Worked cone penetration,0.1mm | 320 | 280 | 232 | GB/T 269 |
dropping point,ºC | 185 | 195 | 145 | GB/T 4929 |
penetration change after 100,000 strokes,0.1mm | 20 | 20 | 20 | GB/T 269 |
water washout amounts(38°C,lh),% | 3.1 | 2.5 | 1.9 | SH/T 0109 |
Anti-corrosion property(52ºC,48h) | Up to standrd | GB/T 5018 | ||
Steel mesh oil separation(100ºC,24H),% | 5 | 3.3 | 1.9 | SH/T 0324 |
Similar viscosity(-15°C,10s-1),Pa·s | 410 | 649 | 840 | SH/T 0048 |
5.Company Introduction
Puyang Xinye Special Lubricating Oil and Grease Co., Ltd. was established in 1989, located in Henan Puyang City, the central of Zhongyuan Oil Field. The R&D center of the company is more than 1200 square meters, with 15 researchers and 5 people with master degree or above. With 100,000 tons/year of grease production capacity; 100,000 tons/year lubricating oil production capacity. It is the leading grease production and marketing base in China. The company sets up 9 sales branches. The products cover most parts of our country and realize the synchronous output of the whole link of production, research, storage and transportation, sales and service.
The company has a grease automatic blending and packaging production line, the laboratory has innovative research and development capability, the products cover general grease, special grease, precision machinery grease, construction machinery grease, metallurgical industry special grease, internal combustion engine oil, industrial oil, construction machinery oil and other 21 categories of more than 320 varieties. Widely used in automobile, machinery, metallurgy, mining, petroleum processing, electronics, bearings and many other fields.
Puyang Xinye Special Lubricating Oil and Grease Co., Ltd. is committed to the development and service of China's lubricant industry, actively participates in international competition, and provides more efficient, environmental protection and energy saving lubrication solutions for global customers. Adhering to the spirit of craftsmanship, we will strive to promote the construction of industrial 4.0 smart factories and contribute to the new development of Made in China 2025 strategy.
6.FAQ
1. Are you a trading company or manufacturer?
We are a professional grease manufacturer with 32 years of industry experience. Our factory is located in Puyang city, Henan province, which Zhongyuan Oilfield located.
2. What is the L/T?
The lead time will be roughly 10 days after deposit payment if you place an order of one container once.
3. What is your terms of payment?
Based on our sales policy, T/T 30% in advance is request, and 70% balance payment should be completed before shipment.
We can provide you with real photos or video of the goods before balance payment.
4. What is your terms of delivery?
It will be available in EXW, FOB, CFR or CIF.
5. What is the packaging for the grease?
Generally, packed with barrel, PE bag, can, spring tube or drum in different size, that depends on your final requirement.
6. Can I get some samples from your side?
Of course you can, free samples will be provided, but you need to pay freight cost.
7. Is it possible to do ODM or OEM for us?
We are happy to do so. Let us know your definite requirements including grease color and dropping point etc. If necessary, provide us with your samples,that will be helpful for us to do test.
Crystal Lithium Base Grease
1.product overview
Golden lithium base grease is made of hydroxy base fatty acid thickened mineral oil by high temperature saponification. This product is proportionally added with a variety of additives, greatly improve its mechanical stability, colloidal stability, oxidation stability, rust and water resistance and other properties. Ensure that the grease remains soft and does not lose within the scope of use, and extend the oil change period.The product is a multipurpose grease. lt is formulated with special selected refined mineral base oilsand rust and oxidation inhibitors, and is thickened with a mixed compact and stable metal soapthickener. lt can provides excellent anti-wear protection, superior lubricity, as well as outstandingmechanical stability, water resistance, adhesion, sealing and rust resistance.
2.performance characteristic
Good adhesiveness.
Outstanding oxidation stability to ensure longer service life during application process.
Outstanding mechanical stability under harsh shearing forces.
Excellent resistance to water washout, improved lubricity even under conditions such as highambient humidity and inevitable contamination with water.
Excellent lubricity to reduce abrasion between friction pairs.
3.Recommended application
Suitable for the lubrication of low speed equipment such as construction machinery, agriculturamachinery.
Suitable for lubricating ceramics (such as polishing machines, transmission bearings), metallurgysuch as conveying roller table), automobile (chassis, wheel hub) and conventional generamachinery, etc.
Application temperature range: -20'C~120°C.
4.Typical data
Item | Typical data | Test method | ||
NLGI 1 | NLGI 2 | NLGI 3 | ||
Appearance | Smoothing cream | Visual | ||
Worked cone penetration,0.1mm | 320 | 280 | 232 | GB/T 269 |
dropping point,ºC | 185 | 195 | 145 | GB/T 4929 |
penetration change after 100,000 strokes,0.1mm | 20 | 20 | 20 | GB/T 269 |
water washout amounts(38°C,lh),% | 3.1 | 2.5 | 1.9 | SH/T 0109 |
Anti-corrosion property(52ºC,48h) | Up to standrd | GB/T 5018 | ||
Steel mesh oil separation(100ºC,24H),% | 5 | 3.3 | 1.9 | SH/T 0324 |
Similar viscosity(-15°C,10s-1),Pa·s | 410 | 649 | 840 | SH/T 0048 |
5.Company Introduction
Puyang Xinye Special Lubricating Oil and Grease Co., Ltd. was established in 1989, located in Henan Puyang City, the central of Zhongyuan Oil Field. The R&D center of the company is more than 1200 square meters, with 15 researchers and 5 people with master degree or above. With 100,000 tons/year of grease production capacity; 100,000 tons/year lubricating oil production capacity. It is the leading grease production and marketing base in China. The company sets up 9 sales branches. The products cover most parts of our country and realize the synchronous output of the whole link of production, research, storage and transportation, sales and service.
The company has a grease automatic blending and packaging production line, the laboratory has innovative research and development capability, the products cover general grease, special grease, precision machinery grease, construction machinery grease, metallurgical industry special grease, internal combustion engine oil, industrial oil, construction machinery oil and other 21 categories of more than 320 varieties. Widely used in automobile, machinery, metallurgy, mining, petroleum processing, electronics, bearings and many other fields.
Puyang Xinye Special Lubricating Oil and Grease Co., Ltd. is committed to the development and service of China's lubricant industry, actively participates in international competition, and provides more efficient, environmental protection and energy saving lubrication solutions for global customers. Adhering to the spirit of craftsmanship, we will strive to promote the construction of industrial 4.0 smart factories and contribute to the new development of Made in China 2025 strategy.
6.FAQ
1. Are you a trading company or manufacturer?
We are a professional grease manufacturer with 32 years of industry experience. Our factory is located in Puyang city, Henan province, which Zhongyuan Oilfield located.
2. What is the L/T?
The lead time will be roughly 10 days after deposit payment if you place an order of one container once.
3. What is your terms of payment?
Based on our sales policy, T/T 30% in advance is request, and 70% balance payment should be completed before shipment.
We can provide you with real photos or video of the goods before balance payment.
4. What is your terms of delivery?
It will be available in EXW, FOB, CFR or CIF.
5. What is the packaging for the grease?
Generally, packed with barrel, PE bag, can, spring tube or drum in different size, that depends on your final requirement.
6. Can I get some samples from your side?
Of course you can, free samples will be provided, but you need to pay freight cost.
7. Is it possible to do ODM or OEM for us?
We are happy to do so. Let us know your definite requirements including grease color and dropping point etc. If necessary, provide us with your samples,that will be helpful for us to do test.
