https://xinyerunhua.en.made-in-china.com
| Quantity: | |
|---|---|
Performance Characteristic
Excellent high temperature resistance, friction parts at higher temperatures or higher ambient temperature grease does not lose, bearings or friction pairs are continuously protected, effectively extend the service life of bearings under high temperature conditions.
Good extreme pressure anti-wear performance, to meet the bearing lubrication of high load or a certain impact load mechanical equipment.
Good oxidation stability, to ensure that the grease in the process of use has a long service life.
Recommended Application
Suitable for a variety of lubrication methods, No. 1 grease can be used for centralized lubrication system, No. 2, No. 3 can be used for manual grease injection.
lt is suitable for lubrication of high temperature friction parts of automobile wheel hub maintenance, metallurgy industry, heavy load equipment and printing and dyeing, large motor.car, hot oil pump bearings and other mechanical equipment.
Operating temperature: -20C ~ 220°C.
Typical Data
| Item | Typical data | Test method | ||
| NLGI 1 | NLGI 2 | NLGI 3 | ||
| Appearance | Smoothing cream | Visual | ||
| Worked cone penetration, 0.1mm | 328 | 274 | 240 | GB/T 269 |
| Dropping point, ℃ | 280 | 285 | 296 | GB/T 3498 |
| Penetration change after 100,000 strokes, 0.1mm | 7 | 7 | 8 | GB/T 269 |
| Carrying capacity (four ball method) PB value, N | 882 | 882 | 882 | SH/T 0202 |
| Carrying capacity (four ball method) PD value,N | 3089 | 3089 | 3089 | SH/T 0202 |
| Carrying capacity (Timken method) OK value,N | 200 | 200 | 200 | SH/T 0203 |
| Anti-corrosion property(52℃,48h) | Up to standard | GB/T 5018 | ||
| Steel mesh oil separation(100℃，24H)% | 0.9 | 0.4 | 0.2 | SH/T 0324 |
| Similar viscosity (-10°C,10s-1),Pa·s | 238 | 432 | 605 | SH/T 0048 |
Performance Characteristic
Excellent high temperature resistance, friction parts at higher temperatures or higher ambient temperature grease does not lose, bearings or friction pairs are continuously protected, effectively extend the service life of bearings under high temperature conditions.
Good extreme pressure anti-wear performance, to meet the bearing lubrication of high load or a certain impact load mechanical equipment.
Good oxidation stability, to ensure that the grease in the process of use has a long service life.
Recommended Application
Suitable for a variety of lubrication methods, No. 1 grease can be used for centralized lubrication system, No. 2, No. 3 can be used for manual grease injection.
lt is suitable for lubrication of high temperature friction parts of automobile wheel hub maintenance, metallurgy industry, heavy load equipment and printing and dyeing, large motor.car, hot oil pump bearings and other mechanical equipment.
Operating temperature: -20C ~ 220°C.
Typical Data
| Item | Typical data | Test method | ||
| NLGI 1 | NLGI 2 | NLGI 3 | ||
| Appearance | Smoothing cream | Visual | ||
| Worked cone penetration, 0.1mm | 328 | 274 | 240 | GB/T 269 |
| Dropping point, ℃ | 280 | 285 | 296 | GB/T 3498 |
| Penetration change after 100,000 strokes, 0.1mm | 7 | 7 | 8 | GB/T 269 |
| Carrying capacity (four ball method) PB value, N | 882 | 882 | 882 | SH/T 0202 |
| Carrying capacity (four ball method) PD value,N | 3089 | 3089 | 3089 | SH/T 0202 |
| Carrying capacity (Timken method) OK value,N | 200 | 200 | 200 | SH/T 0203 |
| Anti-corrosion property(52℃,48h) | Up to standard | GB/T 5018 | ||
| Steel mesh oil separation(100℃，24H)% | 0.9 | 0.4 | 0.2 | SH/T 0324 |
| Similar viscosity (-10°C,10s-1),Pa·s | 238 | 432 | 605 | SH/T 0048 |
