Availability: | |
---|---|
Quantity: | |
Performance Characteristic
Good extreme pressure anti-wear performance, to meet the lubrication of heavy duty automobile hub bearings.
Good high temperature performance, high temperature adhesion, can ensure good lubricating oil film.
Good colloidal stability, long service life of grease, can extend the grease change cycle.
Good water resistance and protection.
Recommended Application
lt is suitable for lubrication of wheel bearings, chassis, motor pumps and other friction parts of trucks, construction machinery vehicles, large buses and heavy-duty trucks under harsh conditions such as medium speed and heavy load.
Operating temperature:-30°C ~220°C
Typical Data
Item | Typical data | Test method | ||
NLGI 1 | NLGI 2 | NLGI 3 | ||
Appearance | Smoothing cream | Visual | ||
Worked cone penetration, 0.1mm | 315 | 270 | 228 | GB/T 269 |
Dropping point,℃ | 274 | 280 | 285 | GB/T 3498 |
Penetration change after 100,000 strokes,0.1mm | 17 | 20 | 23 | GB/T 269 |
Carrying capacity (four ball method) PB value, N | 617 | 617 | 617 | SH/T 0202 |
Carrying capacity (four ball method) PD value,N | 3089 | 3089 | 3089 | SH/T 0202 |
Carrying capacity (Timken method) OK value,N | 156 | 156 | 156 | SH/T 0203 |
Anti-corrosion property(52℃,48h) | Up to standard | GB/T 5018 | ||
Steel mesh oil separation(100℃, 24H)% | 1 | 0.5 | 0.4 | SH/T 0324 |
Similar viscosity (-10°C,10s-1),Pa·s | 607 | 810 | 1200 | SH/T 0048 |
Performance Characteristic
Good extreme pressure anti-wear performance, to meet the lubrication of heavy duty automobile hub bearings.
Good high temperature performance, high temperature adhesion, can ensure good lubricating oil film.
Good colloidal stability, long service life of grease, can extend the grease change cycle.
Good water resistance and protection.
Recommended Application
lt is suitable for lubrication of wheel bearings, chassis, motor pumps and other friction parts of trucks, construction machinery vehicles, large buses and heavy-duty trucks under harsh conditions such as medium speed and heavy load.
Operating temperature:-30°C ~220°C
Typical Data
Item | Typical data | Test method | ||
NLGI 1 | NLGI 2 | NLGI 3 | ||
Appearance | Smoothing cream | Visual | ||
Worked cone penetration, 0.1mm | 315 | 270 | 228 | GB/T 269 |
Dropping point,℃ | 274 | 280 | 285 | GB/T 3498 |
Penetration change after 100,000 strokes,0.1mm | 17 | 20 | 23 | GB/T 269 |
Carrying capacity (four ball method) PB value, N | 617 | 617 | 617 | SH/T 0202 |
Carrying capacity (four ball method) PD value,N | 3089 | 3089 | 3089 | SH/T 0202 |
Carrying capacity (Timken method) OK value,N | 156 | 156 | 156 | SH/T 0203 |
Anti-corrosion property(52℃,48h) | Up to standard | GB/T 5018 | ||
Steel mesh oil separation(100℃, 24H)% | 1 | 0.5 | 0.4 | SH/T 0324 |
Similar viscosity (-10°C,10s-1),Pa·s | 607 | 810 | 1200 | SH/T 0048 |