https://xinyerunhua.en.made-in-china.com
| Quantity: | |
|---|---|
performance Characteristic
Excellent extreme pressure anti-wear, effectively reduce the wear and pitting of friction pairs extend the service life of equipment.
Excellent high temperature resistance, can be used for high temperature lubrication parts Mechanical stability and oxidation stability are outstanding, which can ensure a long fat change cycle.
Water resistance and rust resistance, good protection.
Recommended Application
Lubrication of high temperature, heavy load equipment and printing and dyeing, large motor, kiln car, hot oil pump and other equipment friction parts in metallurgical industry.
Operating temperature:-20°C~180°C.
Typical Data
| Item | Typical data | Test method | ||
| NLGI 1 | NLGI 2 | NLGI 3 | ||
| Appearance | Smoothing cream | Visual | ||
| Worked cone penetration,0.1mm | 320 | 280 | 232 | GB/T 269 |
| Dropping point,℃ | 197 | 200 | 205 | GB/T 4929 |
| Penetration change after 100,000 strokes,0.1mm | 369 | 330 | 301 | GB/T 269 |
| Water washout amounts(38°C,lh),% | 2.3 | 1.6 | 1 | SH/T 0109 |
| Anti-corrosion property(52℃,48h) | Up to standard | GB/T 5018 | ||
| Steel mesh oil separation)100℃，24H)% | 3 | 1.2 | 0.9 | SH/T 0324 |
| Similar viscosity(-10°C,10s-1),Pa·s | 410 | 649 | 840 | SH/T 0048 |
performance Characteristic
Excellent extreme pressure anti-wear, effectively reduce the wear and pitting of friction pairs extend the service life of equipment.
Excellent high temperature resistance, can be used for high temperature lubrication parts Mechanical stability and oxidation stability are outstanding, which can ensure a long fat change cycle.
Water resistance and rust resistance, good protection.
Recommended Application
Lubrication of high temperature, heavy load equipment and printing and dyeing, large motor, kiln car, hot oil pump and other equipment friction parts in metallurgical industry.
Operating temperature:-20°C~180°C.
Typical Data
| Item | Typical data | Test method | ||
| NLGI 1 | NLGI 2 | NLGI 3 | ||
| Appearance | Smoothing cream | Visual | ||
| Worked cone penetration,0.1mm | 320 | 280 | 232 | GB/T 269 |
| Dropping point,℃ | 197 | 200 | 205 | GB/T 4929 |
| Penetration change after 100,000 strokes,0.1mm | 369 | 330 | 301 | GB/T 269 |
| Water washout amounts(38°C,lh),% | 2.3 | 1.6 | 1 | SH/T 0109 |
| Anti-corrosion property(52℃,48h) | Up to standard | GB/T 5018 | ||
| Steel mesh oil separation)100℃，24H)% | 3 | 1.2 | 0.9 | SH/T 0324 |
| Similar viscosity(-10°C,10s-1),Pa·s | 410 | 649 | 840 | SH/T 0048 |
