https://xinyerunhua.en.made-in-china.com
| Quantity: | |
|---|---|
G700
Xinye
product overview
Molybdenum disulfide complex calcium base grease is made by special process by thickening highlrefined mineral base oil with new compound thickener and adding additives such as molybdenumdisulfide.
performance characteristic
Excellent extreme pressure anti-wear, effectively reduce the wear and pitting of friction pairsextend the service life of equipment.
Excellent high temperature resistance, can be used for high temperature lubrication part so Mechanical stability and oxidation stability are outstanding, which can ensure a long fat changecycle.
Water resistance and rust resistance, good protection
Recommended application
Lubrication of high temperature, heavy load equipment and printing and dyeing, large motor, kilncar, hot oil pump and other equipment friction parts in metallurgical industry.
Operating temperature:-20°C~180°C.
Typical data
| Item | Typical data | Test method | ||
NLGI 1 | NLGI 2 | NLGI 3 | ||
Appearance | Smoothing cream | visual | ||
Worked cone penetration,0.1mm | 320 | 280 | 232 | GB/T 269 |
dropping point,ºC | 182 | 194 | 205 | GB/T 4929 |
penetration change after 100,000 strokes,0.1mm | 369 | 330 | 301 | GB/T 269 |
water washout amounts(38°C,lh),% | 2.3 | 1.6 | 1.0 | SH/T 0109 |
Anti-corrosion property(52ºC,48h) | Up to standard | GB/T 5018 | ||
Steel mesh oil separation(100ºC,24H)% | 3 | 1.2 | 0.9 | SH/T 0324 |
Similar viscosity(-10°C,10s-1),Pa·s | 410 | 649 | 840 | SH/T 0048 |
Company introduction
Puyang Xinye Special Lubricant Grease Co., Ltd. was established in 1989,the company is located in China, Central China, where the Zhongyuan Oil Field is located, Puyang City, Henan Province. After 32 years of steady development,the company is already a large-scale lubricant and grease production base integrating R&D, production, warehousing and sales.grease design capacity is 100,000 tons,10 grease production lines,38 sub-assembly production lines,lubricant design capacity is 100,000 tons,12 lubricant production lines, two of them are fully automatic production lines,the base oil storage capacity is 50,000 tons.the company's products have outstanding performance, complete varieties and distinct grades.
Grease products include: lithium-based grease, calcium-based grease, calcium sulfonate grease, low-noise grease, engineering machinery grease, bearing grease, high temperature grease, water-resistant mechanical grease.
Lubricating oil products include: diesel engine oil, gasoline engine oil, gear oil, hydraulic oil, special oil for construction machinery, etc. more than 100 varieties, At the same time, the company also provides OEM, ODM custom foundry services.
FAQ
1. Are you a trading company or manufacturer?
We are a professional grease manufacturer with 30 years of industry experience. Our factory is located in Puyang City, Henan Province.
2. What is the L/T?
The lead time will be roughly 10 days after deposit payment if you place an order of one container once.
3. What is your terms of payment?
Based on our sales policy, L/C or T/T 30% as deposit should be paid before order, and 70% balance payment should be completed before shipment. We can provide you with real photos or video of the goods before balance payment.
4. What is your terms of delivery?
It will be available in EXW, FOB, CFR or CIF.
5. What is the packaging for the grease?
Generally, packed with barrel, PE bag, can, spring tube or drum in different size, that depends on your final requirement.
6. Can I get some samples from your side?
We can provide free samples, the freight cost will be born by you.
7. Is it possible to do ODM or OEM for us?
We would like to do so. Let us know your definite requirements including grease color and dropping point etc. If necessary, provide us with your samples, that will be helpful for us to do test.
product overview
Molybdenum disulfide complex calcium base grease is made by special process by thickening highlrefined mineral base oil with new compound thickener and adding additives such as molybdenumdisulfide.
performance characteristic
Excellent extreme pressure anti-wear, effectively reduce the wear and pitting of friction pairsextend the service life of equipment.
Excellent high temperature resistance, can be used for high temperature lubrication part so Mechanical stability and oxidation stability are outstanding, which can ensure a long fat changecycle.
Water resistance and rust resistance, good protection
Recommended application
Lubrication of high temperature, heavy load equipment and printing and dyeing, large motor, kilncar, hot oil pump and other equipment friction parts in metallurgical industry.
Operating temperature:-20°C~180°C.
Typical data
| Item | Typical data | Test method | ||
NLGI 1 | NLGI 2 | NLGI 3 | ||
Appearance | Smoothing cream | visual | ||
Worked cone penetration,0.1mm | 320 | 280 | 232 | GB/T 269 |
dropping point,ºC | 182 | 194 | 205 | GB/T 4929 |
penetration change after 100,000 strokes,0.1mm | 369 | 330 | 301 | GB/T 269 |
water washout amounts(38°C,lh),% | 2.3 | 1.6 | 1.0 | SH/T 0109 |
Anti-corrosion property(52ºC,48h) | Up to standard | GB/T 5018 | ||
Steel mesh oil separation(100ºC,24H)% | 3 | 1.2 | 0.9 | SH/T 0324 |
Similar viscosity(-10°C,10s-1),Pa·s | 410 | 649 | 840 | SH/T 0048 |
Company introduction
Puyang Xinye Special Lubricant Grease Co., Ltd. was established in 1989,the company is located in China, Central China, where the Zhongyuan Oil Field is located, Puyang City, Henan Province. After 32 years of steady development,the company is already a large-scale lubricant and grease production base integrating R&D, production, warehousing and sales.grease design capacity is 100,000 tons,10 grease production lines,38 sub-assembly production lines,lubricant design capacity is 100,000 tons,12 lubricant production lines, two of them are fully automatic production lines,the base oil storage capacity is 50,000 tons.the company's products have outstanding performance, complete varieties and distinct grades.
Grease products include: lithium-based grease, calcium-based grease, calcium sulfonate grease, low-noise grease, engineering machinery grease, bearing grease, high temperature grease, water-resistant mechanical grease.
Lubricating oil products include: diesel engine oil, gasoline engine oil, gear oil, hydraulic oil, special oil for construction machinery, etc. more than 100 varieties, At the same time, the company also provides OEM, ODM custom foundry services.
FAQ
1. Are you a trading company or manufacturer?
We are a professional grease manufacturer with 30 years of industry experience. Our factory is located in Puyang City, Henan Province.
2. What is the L/T?
The lead time will be roughly 10 days after deposit payment if you place an order of one container once.
3. What is your terms of payment?
Based on our sales policy, L/C or T/T 30% as deposit should be paid before order, and 70% balance payment should be completed before shipment. We can provide you with real photos or video of the goods before balance payment.
4. What is your terms of delivery?
It will be available in EXW, FOB, CFR or CIF.
5. What is the packaging for the grease?
Generally, packed with barrel, PE bag, can, spring tube or drum in different size, that depends on your final requirement.
6. Can I get some samples from your side?
We can provide free samples, the freight cost will be born by you.
7. Is it possible to do ODM or OEM for us?
We would like to do so. Let us know your definite requirements including grease color and dropping point etc. If necessary, provide us with your samples, that will be helpful for us to do test.
