https://xinyerunhua.en.made-in-china.com
| Quantity: | |
|---|---|
XTA
Xinye
1.product overview
The product is made of fatty acid calcium soap thickened selected mineral base oil. it has excellentwater resistance, mechanical stability and lubricity.
2.performance characteristic
Good water resistance and is suitable for use under wet and watery conditions.
The soap fiber of the thickening agent has reasonable structure and uniform distribution.
3.Recommended application
Suitable for bearing lubrication of agricultural vehicles such as tractors, water pumps and othermechanical equipment.
Suitable for the lubrication of low speed equipment such as construction machinery, transmissionbearings, metallurgy (such as conveying roller table), automobile (chassis, wheel hub) andconventional general machinery,etc.
Operatingtemperature:-10°C~90℃
4.Typical data
Item | Typical data | Test method | |||
| NLGI 1 | NLGI 2 | NLGI 3 | NLGI 4 | ||
Worked cone penetration,0.1mm | 325 | 270 | 239 | 195 | GB/T 269 |
Penetration change after 100000 strokes 0.1mm | 15 | 17 | 23 | 24 | GB/T 269 |
moisture content,% | 0.77 | 1.61 | 1.82 | 1.63 | GB/T 512 |
corrosion(T2 copper,indoor temperature,24h) | Up to standard | GB/T 7326 | |||
Steel mesh oil separation(100ºC,24H)% | 5 | 5 | 2.8 | 2.1 | SH/T 0324 |
Dropping point,℃ | 110 | 115 | 124 | 130 | GB/T 269 |
5. Company Introduction
Puyang Xinye Special Lubricant Grease Co., Ltd. was established in 1989,the company is located in China, Central China, where the Zhongyuan Oil Field is located, Puyang City, Henan Province. After 32 years of steady development,the company is already a large-scale lubricant and grease production base integrating R&D, production, warehousing and sales.grease design capacity is 100,000 tons,10 grease production lines,38 sub-assembly production lines,lubricant design capacity is 100,000 tons,12 lubricant production lines, two of them are fully automatic production lines,the base oil storage capacity is 50,000 tons.the company's products have outstanding performance, complete varieties and distinct grades.
Grease products include: lithium-based grease, calcium-based grease, calcium sulfonate grease, low-noise grease, engineering machinery grease, bearing grease, high temperature grease, water-resistant mechanical grease.
Lubricating oil products include: diesel engine oil, gasoline engine oil, gear oil, hydraulic oil, special oil for construction machinery, etc. more than 100 varieties, At the same time, the company also provides OEM, ODM custom foundry services.
6.FAQ
1. Are you a trading company or manufacturer?
We are a professional grease manufacturer with 32 years of industry experience. Our factory is located in Puyang city, Henan province, which Zhongyuan Oilfield located.
2. What is the L/T?
The lead time will be roughly 10 days after deposit payment if you place an order of one container once.
3. What is your terms of payment?
Based on our sales policy, T/T 30% in advance is request, and 70% balance payment should be completed before shipment.
We can provide you with real photos or video of the goods before balance payment.
4. What is your terms of delivery?
It will be available in EXW, FOB, CFR or CIF.
5. What is the packaging for the grease?
Generally, packed with barrel, PE bag, can, spring tube or drum in different size, that depends on your final requirement.
6. Can I get some samples from your side?
Of course you can, free samples will be provided, but you need to pay freight cost.
7. Is it possible to do ODM or OEM for us?
We are happy to do so. Let us know your definite requirements including grease color and dropping point etc. If necessary, provide us with your samples,that will be helpful for us to do test.
1.product overview
The product is made of fatty acid calcium soap thickened selected mineral base oil. it has excellentwater resistance, mechanical stability and lubricity.
2.performance characteristic
Good water resistance and is suitable for use under wet and watery conditions.
The soap fiber of the thickening agent has reasonable structure and uniform distribution.
3.Recommended application
Suitable for bearing lubrication of agricultural vehicles such as tractors, water pumps and othermechanical equipment.
Suitable for the lubrication of low speed equipment such as construction machinery, transmissionbearings, metallurgy (such as conveying roller table), automobile (chassis, wheel hub) andconventional general machinery,etc.
Operatingtemperature:-10°C~90℃
4.Typical data
Item | Typical data | Test method | |||
| NLGI 1 | NLGI 2 | NLGI 3 | NLGI 4 | ||
Worked cone penetration,0.1mm | 325 | 270 | 239 | 195 | GB/T 269 |
Penetration change after 100000 strokes 0.1mm | 15 | 17 | 23 | 24 | GB/T 269 |
moisture content,% | 0.77 | 1.61 | 1.82 | 1.63 | GB/T 512 |
corrosion(T2 copper,indoor temperature,24h) | Up to standard | GB/T 7326 | |||
Steel mesh oil separation(100ºC,24H)% | 5 | 5 | 2.8 | 2.1 | SH/T 0324 |
Dropping point,℃ | 110 | 115 | 124 | 130 | GB/T 269 |
5. Company Introduction
Puyang Xinye Special Lubricant Grease Co., Ltd. was established in 1989,the company is located in China, Central China, where the Zhongyuan Oil Field is located, Puyang City, Henan Province. After 32 years of steady development,the company is already a large-scale lubricant and grease production base integrating R&D, production, warehousing and sales.grease design capacity is 100,000 tons,10 grease production lines,38 sub-assembly production lines,lubricant design capacity is 100,000 tons,12 lubricant production lines, two of them are fully automatic production lines,the base oil storage capacity is 50,000 tons.the company's products have outstanding performance, complete varieties and distinct grades.
Grease products include: lithium-based grease, calcium-based grease, calcium sulfonate grease, low-noise grease, engineering machinery grease, bearing grease, high temperature grease, water-resistant mechanical grease.
Lubricating oil products include: diesel engine oil, gasoline engine oil, gear oil, hydraulic oil, special oil for construction machinery, etc. more than 100 varieties, At the same time, the company also provides OEM, ODM custom foundry services.
6.FAQ
1. Are you a trading company or manufacturer?
We are a professional grease manufacturer with 32 years of industry experience. Our factory is located in Puyang city, Henan province, which Zhongyuan Oilfield located.
2. What is the L/T?
The lead time will be roughly 10 days after deposit payment if you place an order of one container once.
3. What is your terms of payment?
Based on our sales policy, T/T 30% in advance is request, and 70% balance payment should be completed before shipment.
We can provide you with real photos or video of the goods before balance payment.
4. What is your terms of delivery?
It will be available in EXW, FOB, CFR or CIF.
5. What is the packaging for the grease?
Generally, packed with barrel, PE bag, can, spring tube or drum in different size, that depends on your final requirement.
6. Can I get some samples from your side?
Of course you can, free samples will be provided, but you need to pay freight cost.
7. Is it possible to do ODM or OEM for us?
We are happy to do so. Let us know your definite requirements including grease color and dropping point etc. If necessary, provide us with your samples,that will be helpful for us to do test.
