Product Introduction
Water-glycol anti-fire hydraulic fluid is a kind of hydraulic medium with anti-fire characteristics, which is prepared by water, glycol, lubricant, anti-rust agent and defoamer and other special additives. Suitable viscosity, good lubrication characteristics, high viscosity index and good chemical stability are similar to mineral oil, so that water-ethylene glycol fire resistant hydraulic is widely used in metallurgy, machinery, mining and ships and other industrial fields.
Preformance Characteristics
No ignition point, no flash point, heat manifold fire resistance test (704℃) does not burn, so the use of JZ601 near high temperature or open fire equipment and high pressure and hydraulic spray can cause fire equipment, can completely avoid the occurrence of fire accidents.
Excellent cold resistance
Contains a large amount of ethylene glycol (an excellent depressant), so the freezing point (-40 ° C) is very low. In the general cold environment (> -20℃) can start the equipment as usual without heating the hydraulic medium, if the ambient temperature is too low, JZ601 viscosity is too large to start the equipment, you can preheat JZ601 and start again, even if the temperature is too low and frozen, after heating and melting, JZ601 performance unchanged.
Excellent wear resistance
It contains the latest international extreme pressure anti-wear agent, so it can more effectively reduce the wear and bearing capacity of hydraulic equipment, and fully meet the use requirements of various hydraulic equipment from low pressure to high pressure.
Excellent rust resistance
Containing high-performance gas phase rust prevention agent, not only the metal material soaked by JZ601 in the oil tank and pipeline of hydraulic equipment will not rust, but also the part that is not soaked will not rust.
Excellent foam resistance
It contains high-quality defoamer, which can inhibit the formation of foam and make the foam disappear quickly. Therefore, there is little foam during use, which ensures the stable and normal operation of hydraulic equipment.
Very long service life.
Due to the use of high-quality imported raw materials, so the shear stability, oxidation resistance and corrosion resistance are very good, long-term use or storage will not stratification, precipitation and decay. It can be used normally for more than 10 years even in high pressure equipment.
Can meet the high standard of environmental protection requirements
No toxic side effects to the human body, no pollution to the atmosphere, environment and water sources.
Typcial Data
Product type | 46# | --- |
kinematic viscosity(100ºC),mm2 /s | 11.28 | GB/T 265 |
kinematic viscosity(40ºC),mm2 /s | 46 | GB/T 265 |
Density (20℃) g/cm3> | 1 | GB/T 2540 |
PH Value | 10 | SH/T 7304 |
VI(viscosity index) | 191 | GB/T 2541 |
Flash point (opening),ºC | / | GB/T 3536 |
pour point,ºC | -39 | GB/T 3535 |
Foam property, foam stability,mL/mL |
15/0 10/0 15/0 | GB/T 12579 |
mechanical impurities ,% | / | GB/T 511 |
moisture content,% | / | GB/T 260 |
Puyang Xinye Special Lubricant Grease Co., Ltd. was established in 1989,the company is located in China, Central China, where the Zhongyuan Oil Field is located, Puyang City, Henan Province.
After 32 years of steady development,the company is already a large-scale lubricant and grease production base integrating R&D, production, warehousing and sales.grease design capacity is 100,000 tons,10 grease production lines,38 sub-assembly production lines,lubricant design capacity is 100,000 tons,12 lubricant production lines,two of them are fully automatic production lines,the base oil storage capacity is 50,000 tons.the company's products have outstanding performance, complete varieties and distinct grades.
Grease products include: lithium-based grease, calcium-based grease, calcium sulfonate grease, low-noise grease, engineering machinery grease, bearing grease, high temperature grease, water-resistant mechanical grease.
Lubricating oil products include: diesel engine oil, gasoline engine oil, gear oil, hydraulic oil, special oil for construction machinery, etc. more than 100 varieties,
At the same time, the company also provides OEM, ODM custom foundry services.
FAQ
1. Are you a trading company or manufacturer?
We are a professional grease manufacturer with 32 years of industry experience. Our factory is located in Puyang city, Henan province, which Zhongyuan Oilfield located.
2. What is the L/T?
The lead time will be roughly 10 days after deposit payment if you place an order of one container once.
3. What is your terms of payment?
Based on our sales policy, T/T 30% in advance is request, and 70% balance payment should be completed before shipment.
We can provide you with real photos or video of the goods before balance payment.
4. What is your terms of delivery?
It will be available in EXW, FOB, CFR or CIF.
5. What is the packaging for the grease?
Generally, packed with barrel, PE bag, can, spring tube or drum in different size, that depends on your final requirement.
6. Can I get some samples from your side?
Of course you can, free samples will be provided, but you need to pay freight cost.
7. Is it possible to do ODM or OEM for us?
We are happy to do so. Let us know your definite requirements including grease color and dropping point etc. If necessary, provide us with your samples,that will be helpful for us to do test.Company introduction.
Product Introduction
Water-glycol anti-fire hydraulic fluid is a kind of hydraulic medium with anti-fire characteristics, which is prepared by water, glycol, lubricant, anti-rust agent and defoamer and other special additives. Suitable viscosity, good lubrication characteristics, high viscosity index and good chemical stability are similar to mineral oil, so that water-ethylene glycol fire resistant hydraulic is widely used in metallurgy, machinery, mining and ships and other industrial fields.
Preformance Characteristics
No ignition point, no flash point, heat manifold fire resistance test (704℃) does not burn, so the use of JZ601 near high temperature or open fire equipment and high pressure and hydraulic spray can cause fire equipment, can completely avoid the occurrence of fire accidents.
Excellent cold resistance
Contains a large amount of ethylene glycol (an excellent depressant), so the freezing point (-40 ° C) is very low. In the general cold environment (> -20℃) can start the equipment as usual without heating the hydraulic medium, if the ambient temperature is too low, JZ601 viscosity is too large to start the equipment, you can preheat JZ601 and start again, even if the temperature is too low and frozen, after heating and melting, JZ601 performance unchanged.
Excellent wear resistance
It contains the latest international extreme pressure anti-wear agent, so it can more effectively reduce the wear and bearing capacity of hydraulic equipment, and fully meet the use requirements of various hydraulic equipment from low pressure to high pressure.
Excellent rust resistance
Containing high-performance gas phase rust prevention agent, not only the metal material soaked by JZ601 in the oil tank and pipeline of hydraulic equipment will not rust, but also the part that is not soaked will not rust.
Excellent foam resistance
It contains high-quality defoamer, which can inhibit the formation of foam and make the foam disappear quickly. Therefore, there is little foam during use, which ensures the stable and normal operation of hydraulic equipment.
Very long service life.
Due to the use of high-quality imported raw materials, so the shear stability, oxidation resistance and corrosion resistance are very good, long-term use or storage will not stratification, precipitation and decay. It can be used normally for more than 10 years even in high pressure equipment.
Can meet the high standard of environmental protection requirements
No toxic side effects to the human body, no pollution to the atmosphere, environment and water sources.
Typcial Data
Product type | 46# | --- |
kinematic viscosity(100ºC),mm2 /s | 11.28 | GB/T 265 |
kinematic viscosity(40ºC),mm2 /s | 46 | GB/T 265 |
Density (20℃) g/cm3> | 1 | GB/T 2540 |
PH Value | 10 | SH/T 7304 |
VI(viscosity index) | 191 | GB/T 2541 |
Flash point (opening),ºC | / | GB/T 3536 |
pour point,ºC | -39 | GB/T 3535 |
Foam property, foam stability,mL/mL |
15/0 10/0 15/0 | GB/T 12579 |
mechanical impurities ,% | / | GB/T 511 |
moisture content,% | / | GB/T 260 |
Puyang Xinye Special Lubricant Grease Co., Ltd. was established in 1989,the company is located in China, Central China, where the Zhongyuan Oil Field is located, Puyang City, Henan Province.
After 32 years of steady development,the company is already a large-scale lubricant and grease production base integrating R&D, production, warehousing and sales.grease design capacity is 100,000 tons,10 grease production lines,38 sub-assembly production lines,lubricant design capacity is 100,000 tons,12 lubricant production lines,two of them are fully automatic production lines,the base oil storage capacity is 50,000 tons.the company's products have outstanding performance, complete varieties and distinct grades.
Grease products include: lithium-based grease, calcium-based grease, calcium sulfonate grease, low-noise grease, engineering machinery grease, bearing grease, high temperature grease, water-resistant mechanical grease.
Lubricating oil products include: diesel engine oil, gasoline engine oil, gear oil, hydraulic oil, special oil for construction machinery, etc. more than 100 varieties,
At the same time, the company also provides OEM, ODM custom foundry services.
FAQ
1. Are you a trading company or manufacturer?
We are a professional grease manufacturer with 32 years of industry experience. Our factory is located in Puyang city, Henan province, which Zhongyuan Oilfield located.
2. What is the L/T?
The lead time will be roughly 10 days after deposit payment if you place an order of one container once.
3. What is your terms of payment?
Based on our sales policy, T/T 30% in advance is request, and 70% balance payment should be completed before shipment.
We can provide you with real photos or video of the goods before balance payment.
4. What is your terms of delivery?
It will be available in EXW, FOB, CFR or CIF.
5. What is the packaging for the grease?
Generally, packed with barrel, PE bag, can, spring tube or drum in different size, that depends on your final requirement.
6. Can I get some samples from your side?
Of course you can, free samples will be provided, but you need to pay freight cost.
7. Is it possible to do ODM or OEM for us?
We are happy to do so. Let us know your definite requirements including grease color and dropping point etc. If necessary, provide us with your samples,that will be helpful for us to do test.Company introduction.