https://xinyerunhua.en.made-in-china.com
SP
Xinye
1.Product Presentation
SP 5W30 fully synthetic engine oil selected high performance base oil and imported additives, with good oxidation stability, can reduce viscosity changes, advanced cleaning dispersion, keep the engine clean and prolong the oil change cycle, can meet the requirements of the current advanced engine, more effective protection of the engine, reduce engine failure and extend the engine life, Reduce fuel consumption and save maintenance costs.
2.Preformance Characteristics
Better low temperature fluidity : When starting in cold weather, SP all-synthetic oil flows faster to all parts of the engine, reducing cold start wear.
longer oil change cycle : Due to the greater oxidation and wear resistance of SP synthetic oil, it can support longer oil change cycles and reduce maintenance costs for owners.
Better cleaning capability : SP synthetic oil can effectively remove the oil sludge and sediment inside the engine, keep the engine clean, improve fuel efficiency.
better protection performance : SP synthetic oil has better protection for various parts inside the engine and prolongs the service life of the engine.
Environmental performance, energy saving and emission reduction : SP synthetic engine oil has also been improved in terms of environmental performance, which helps to reduce exhaust emissions, but also improve the fuel economy of the engine, reduce the fuel consumption and emission level of the vehicle, and contribute to energy saving and emission reduction.
3.Suggestions for use
Suitable for passenger car or light truck gasoline engine, recommended for high performance vehicles equipped with natural aspiration, direct injection, turbocharged, TGDI engine
API SP
SAE 5w-30/10w-40
4LX4/18Lx1/200LX1
4.Typical data
Gasoline Engine Oil SP 5W30 | |
SAE Grade | 5W30 |
Appearance | clear |
Kinematic viscosity (100ºC)/ (mm2/s)ASTM D 445 | 11.37 |
Kinematic viscosity (40ºC)/ (mm2/s)ASTM D 445 | 62.25 |
Dynamic viscosity / (mPa.s)(-30ºC) , ≤CCS, | 5160 |
Viscosity index | 160 |
High-temperature, high-shear viscosity (HTHS), ASTM D 4683 cP @ 150ºC | 2.96 |
NOACK volatility | 8.4 |
Sulfated ash, wt% | 0.94 |
Pour point /ºC, ≤ | -45 |
Flash point (opening) / ºC, ≥ | 235 |
Density @ 15°C, kg/l | 0.825 |
Total base number, mgKOH/g , ≤ | 8.4 |
5.Company Introduction
Puyang Xinye Special Lubricant Grease Co., Ltd. was established in 1989,the company is located in China, Central China, where the Zhongyuan Oil Field is located, Puyang City, Henan Province.
After 32 years of steady development,the company is already a large-scale lubricant and grease production base integrating R&D, production, warehousing and sales.grease design capacity is 100,000 tons,10 grease production lines,38 sub-assembly production lines,lubricant design capacity is 100,000 tons,12 lubricant production lines,two of them are fully automatic production lines,the base oil storage capacity is 50,000 tons.the company's products have outstanding performance, complete varieties and distinct grades.
Grease products include: lithium-based grease, calcium-based grease, calcium sulfonate grease, low-noise grease, engineering machinery grease, bearing grease, high temperature grease, water-resistant mechanical grease.
Lubricating oil products include: diesel engine oil, gasoline engine oil, gear oil, hydraulic oil, special oil for construction machinery, etc. more than 100 varieties,
At the same time, the company also provides OEM, ODM custom foundry services.
6.FAQ
1. Are you a trading company or manufacturer?
We are a professional grease manufacturer with 32 years of industry experience. Our factory is located in Puyang city, Henan province, which Zhongyuan Oilfield located.
2. What is the L/T?
The lead time will be roughly 10 days after deposit payment if you place an order of one container once.
3. What is your terms of payment?
Based on our sales policy, T/T 30% in advance is request, and 70% balance payment should be completed before shipment.
We can provide you with real photos or video of the goods before balance payment.
4. What is your terms of delivery?
It will be available in EXW, FOB, CFR or CIF.
5. What is the packaging for the grease?
Generally, packed with barrel, PE bag, can, spring tube or drum in different size, that depends on your final requirement.
6. Can I get some samples from your side?
Of course you can, free samples will be provided, but you need to pay freight cost.
1.Product Presentation
SP 5W30 fully synthetic engine oil selected high performance base oil and imported additives, with good oxidation stability, can reduce viscosity changes, advanced cleaning dispersion, keep the engine clean and prolong the oil change cycle, can meet the requirements of the current advanced engine, more effective protection of the engine, reduce engine failure and extend the engine life, Reduce fuel consumption and save maintenance costs.
2.Preformance Characteristics
Better low temperature fluidity : When starting in cold weather, SP all-synthetic oil flows faster to all parts of the engine, reducing cold start wear.
longer oil change cycle : Due to the greater oxidation and wear resistance of SP synthetic oil, it can support longer oil change cycles and reduce maintenance costs for owners.
Better cleaning capability : SP synthetic oil can effectively remove the oil sludge and sediment inside the engine, keep the engine clean, improve fuel efficiency.
better protection performance : SP synthetic oil has better protection for various parts inside the engine and prolongs the service life of the engine.
Environmental performance, energy saving and emission reduction : SP synthetic engine oil has also been improved in terms of environmental performance, which helps to reduce exhaust emissions, but also improve the fuel economy of the engine, reduce the fuel consumption and emission level of the vehicle, and contribute to energy saving and emission reduction.
3.Suggestions for use
Suitable for passenger car or light truck gasoline engine, recommended for high performance vehicles equipped with natural aspiration, direct injection, turbocharged, TGDI engine
API SP
SAE 5w-30/10w-40
4LX4/18Lx1/200LX1
4.Typical data
Gasoline Engine Oil SP 5W30 | |
SAE Grade | 5W30 |
Appearance | clear |
Kinematic viscosity (100ºC)/ (mm2/s)ASTM D 445 | 11.37 |
Kinematic viscosity (40ºC)/ (mm2/s)ASTM D 445 | 62.25 |
Dynamic viscosity / (mPa.s)(-30ºC) , ≤CCS, | 5160 |
Viscosity index | 160 |
High-temperature, high-shear viscosity (HTHS), ASTM D 4683 cP @ 150ºC | 2.96 |
NOACK volatility | 8.4 |
Sulfated ash, wt% | 0.94 |
Pour point /ºC, ≤ | -45 |
Flash point (opening) / ºC, ≥ | 235 |
Density @ 15°C, kg/l | 0.825 |
Total base number, mgKOH/g , ≤ | 8.4 |
5.Company Introduction
Puyang Xinye Special Lubricant Grease Co., Ltd. was established in 1989,the company is located in China, Central China, where the Zhongyuan Oil Field is located, Puyang City, Henan Province.
After 32 years of steady development,the company is already a large-scale lubricant and grease production base integrating R&D, production, warehousing and sales.grease design capacity is 100,000 tons,10 grease production lines,38 sub-assembly production lines,lubricant design capacity is 100,000 tons,12 lubricant production lines,two of them are fully automatic production lines,the base oil storage capacity is 50,000 tons.the company's products have outstanding performance, complete varieties and distinct grades.
Grease products include: lithium-based grease, calcium-based grease, calcium sulfonate grease, low-noise grease, engineering machinery grease, bearing grease, high temperature grease, water-resistant mechanical grease.
Lubricating oil products include: diesel engine oil, gasoline engine oil, gear oil, hydraulic oil, special oil for construction machinery, etc. more than 100 varieties,
At the same time, the company also provides OEM, ODM custom foundry services.
6.FAQ
1. Are you a trading company or manufacturer?
We are a professional grease manufacturer with 32 years of industry experience. Our factory is located in Puyang city, Henan province, which Zhongyuan Oilfield located.
2. What is the L/T?
The lead time will be roughly 10 days after deposit payment if you place an order of one container once.
3. What is your terms of payment?
Based on our sales policy, T/T 30% in advance is request, and 70% balance payment should be completed before shipment.
We can provide you with real photos or video of the goods before balance payment.
4. What is your terms of delivery?
It will be available in EXW, FOB, CFR or CIF.
5. What is the packaging for the grease?
Generally, packed with barrel, PE bag, can, spring tube or drum in different size, that depends on your final requirement.
6. Can I get some samples from your side?
Of course you can, free samples will be provided, but you need to pay freight cost.
