Availability: | |
---|---|
Quantity: | |
Hengmei
Hydraulic transmission oil
It is mainly used for hydraulic torque converter and hydraulic coupler of large vehicles such as diesel locomotive, heavy duty truck, track vehicle and off-road vehicle. It can also be used for hydraulic transmission system of construction machinery.
characteristic
1. Suitable viscosity and good viscosive-temperature performance to ensure the normal operation of the hydraulic transmission device in the temperature range of -40 ~ 170ºC.
2. Good wear resistance to ensure that the hydraulic transmission parts of different materials are not easy to be worn under operating conditions.
3. Good thermal stability and antioxidant stability, to adapt to the long-term recycling under 70 ~ 140ºC (or even higher) working conditions.
4. Good low temperature fluidity, low freezing point, in order to adapt to the mechanical time on and off and winter operation of the working conditions.
5. Good foam resistance, so that the oil products under the working conditions of mechanical constantly stirring foam is easy to disappear. So as not to reduce the efficiency of the converter, so that the shift failure.
6.Excellent wear resistance, through a variety of hydraulic pump tests, effectively extend the transport life of the pump and system.
7.Excellent overworry to minimize filter clogging.
8.Excellent oxidation stability, longer service life of the oil.
9.Excellent rubber adaptability, effective protection of sealing materials, prevent leakage.
10.Good water separation performance, so that oil and water separation quickly, avoid oil emulsification.
11.Good air release and foam resistance.
12.Good viscosity and temperature performance and good shear stability, high temperature to provide effective lubrication protection
Typical Date
Item | L-HM Antiwear Hydraulic Oil | ||
ISO grade viscosity | 32 | 46 | 68 |
Motion viscosity (40ºC) /(mm2/S) | 33.2 | 45.8 | 67.4 |
VI(viscosity index) | 98 | 97 | 98 |
Flash point (opening) ° C | 218 | 229 | 235 |
Pour point ° C | -15 | -15 | -13 |
Company Introduction
Puyang Xinye Special Lubricating Oil and Grease Co., Ltd. was established in 1989, located in Henan Puyang City, the central of Zhongyuan Oil Field. The R&D center of the company is more than 1200 square meters, with 15 researchers and 5 people with master degree or above. With 100,000 tons/year of grease production capacity; 100,000 tons/year lubricating oil production capacity. It is the leading grease production and marketing base in China. The company sets up 9 sales branches. The products cover most parts of our country and realize the synchronous output of the whole link of production, research, storage and transportation, sales and service.
The company has a grease automatic blending and packaging production line, the laboratory has innovative research and development capability, the products cover general grease, special grease, precision machinery grease, construction machinery grease, metallurgical industry special grease, internal combustion engine oil, industrial oil, construction machinery oil and other 21 categories of more than 320 varieties. Widely used in automobile, machinery, metallurgy, mining, petroleum processing, electronics, bearings and many other fields.
Puyang Xinye Special Lubricating Oil and Grease Co., Ltd. is committed to the development and service of China's lubricant industry, actively participates in international competition, and provides more efficient, environmental protection and energy saving lubrication solutions for global customers. Adhering to the spirit of craftsmanship, we will strive to promote the construction of industrial 4.0 smart factories and contribute to the new development of Made in China 2025 strategy.
FAQ
1. Are you a trading company or manufacturer?
We are a professional grease manufacturer with 32 years of industry experience. Our factory is located in Puyang city, Henan province, which Zhongyuan Oilfield located.
2. What is the L/T?
The lead time will be roughly 10 days after deposit payment if you place an order of one container once.
3. What is your terms of payment?
Based on our sales policy, T/T 30% in advance is request, and 70% balance payment should be completed before shipment.
We can provide you with real photos or video of the goods before balance payment.
4. What is your terms of delivery?
It will be available in EXW, FOB, CFR or CIF.
5. What is the packaging for the grease?
Generally, packed with barrel, PE bag, can, spring tube or drum in different size, that depends on your final requirement.
6. Can I get some samples from your side?
Of course you can, free samples will be provided, but you need to pay freight cost.
Hydraulic transmission oil
It is mainly used for hydraulic torque converter and hydraulic coupler of large vehicles such as diesel locomotive, heavy duty truck, track vehicle and off-road vehicle. It can also be used for hydraulic transmission system of construction machinery.
characteristic
1. Suitable viscosity and good viscosive-temperature performance to ensure the normal operation of the hydraulic transmission device in the temperature range of -40 ~ 170ºC.
2. Good wear resistance to ensure that the hydraulic transmission parts of different materials are not easy to be worn under operating conditions.
3. Good thermal stability and antioxidant stability, to adapt to the long-term recycling under 70 ~ 140ºC (or even higher) working conditions.
4. Good low temperature fluidity, low freezing point, in order to adapt to the mechanical time on and off and winter operation of the working conditions.
5. Good foam resistance, so that the oil products under the working conditions of mechanical constantly stirring foam is easy to disappear. So as not to reduce the efficiency of the converter, so that the shift failure.
6.Excellent wear resistance, through a variety of hydraulic pump tests, effectively extend the transport life of the pump and system.
7.Excellent overworry to minimize filter clogging.
8.Excellent oxidation stability, longer service life of the oil.
9.Excellent rubber adaptability, effective protection of sealing materials, prevent leakage.
10.Good water separation performance, so that oil and water separation quickly, avoid oil emulsification.
11.Good air release and foam resistance.
12.Good viscosity and temperature performance and good shear stability, high temperature to provide effective lubrication protection
Typical Date
Item | L-HM Antiwear Hydraulic Oil | ||
ISO grade viscosity | 32 | 46 | 68 |
Motion viscosity (40ºC) /(mm2/S) | 33.2 | 45.8 | 67.4 |
VI(viscosity index) | 98 | 97 | 98 |
Flash point (opening) ° C | 218 | 229 | 235 |
Pour point ° C | -15 | -15 | -13 |
Company Introduction
Puyang Xinye Special Lubricating Oil and Grease Co., Ltd. was established in 1989, located in Henan Puyang City, the central of Zhongyuan Oil Field. The R&D center of the company is more than 1200 square meters, with 15 researchers and 5 people with master degree or above. With 100,000 tons/year of grease production capacity; 100,000 tons/year lubricating oil production capacity. It is the leading grease production and marketing base in China. The company sets up 9 sales branches. The products cover most parts of our country and realize the synchronous output of the whole link of production, research, storage and transportation, sales and service.
The company has a grease automatic blending and packaging production line, the laboratory has innovative research and development capability, the products cover general grease, special grease, precision machinery grease, construction machinery grease, metallurgical industry special grease, internal combustion engine oil, industrial oil, construction machinery oil and other 21 categories of more than 320 varieties. Widely used in automobile, machinery, metallurgy, mining, petroleum processing, electronics, bearings and many other fields.
Puyang Xinye Special Lubricating Oil and Grease Co., Ltd. is committed to the development and service of China's lubricant industry, actively participates in international competition, and provides more efficient, environmental protection and energy saving lubrication solutions for global customers. Adhering to the spirit of craftsmanship, we will strive to promote the construction of industrial 4.0 smart factories and contribute to the new development of Made in China 2025 strategy.
FAQ
1. Are you a trading company or manufacturer?
We are a professional grease manufacturer with 32 years of industry experience. Our factory is located in Puyang city, Henan province, which Zhongyuan Oilfield located.
2. What is the L/T?
The lead time will be roughly 10 days after deposit payment if you place an order of one container once.
3. What is your terms of payment?
Based on our sales policy, T/T 30% in advance is request, and 70% balance payment should be completed before shipment.
We can provide you with real photos or video of the goods before balance payment.
4. What is your terms of delivery?
It will be available in EXW, FOB, CFR or CIF.
5. What is the packaging for the grease?
Generally, packed with barrel, PE bag, can, spring tube or drum in different size, that depends on your final requirement.
6. Can I get some samples from your side?
Of course you can, free samples will be provided, but you need to pay freight cost.